All bidet products must also be certified through the WaterMark Certification Scheme. In Australia, the installation of bidet products connected to the drinking water supply must be done by a licensed plumber – it's illegal to do it yourself. In a word, no – unless you happen to be a licensed plumber.ĭue to the increased interest in bidets, Standards Australia and the Australian Competition and Consumer Commission (ACCC) recently published reminders about the importance of following regulations and the potential dangers of installing a bidet yourself. Contamination from cross connections can also occur if they're not installed properly.
This can be prevented by a special device, such as a one-way RPZ valve, which stops the backflow of sewage and contaminated water into a mains water system. In Australia, handheld bidets should be installed by registered plumbers, as those manufactured overseas may not be suitable for our high-pressure water mains systems.īack siphonage, or 'backflow', can occur if there's a drop in water pressure in the pipes.
BIDET CONVERTER KIT INSTALL
On the plus side, they're much cheaper to buy and install than traditional standalone bidets, while offering the same hygienic benefits. Traditionally, their water isn't heated, which some users may find uncomfortable. This also means you'll have to get the walls and floor around the toilet waterproofed as part of the installation. Handheld bidet sprays can sometimes be hard to direct so they may cause a bit of a watery mess. You use a shattaf while you're still on the toilet, then flush the water away. It's attached to the side of the toilet and draws water from the toilet's own supply.
This type of bidet (sometimes known colloquially as a 'bum gun') is a simple water hose with a nozzle controlled by the user. Handheld bidets are also called a 'shattaf' (washer) and are particularly popular in the Middle East and parts of Asia. They can also be more expensive than other types of bidet to buy and install.Ī handheld bidet (or 'shattaf' or 'bum gun') next to a standard toilet. You'll also have to get off the toilet (which may mean getting undressed or removing your trousers or pants). This style of bidet demands more space in the bathroom, as well as extra cleaning. But there are some possible downsides to a standalone bidet, too. Pros and consĪs with all types of bidets, the standalone bidet offers an easy and arguably more hygienic alternative to wiping with just toilet paper. Once they've finished washing, users can dry themselves off with a clean towel or toilet paper. Others are connected to hot water, too, so you can make the water warmer. Other standalone bidets use only cold water. Some bidets don't use water jets – instead, taps fill the basin with water and users clean themselves by hand. When the tap is turned on, a stream of water shoots from jets to wash the genitals and anus. Traditional bidets don't have seats, so users need to squat in place or sit on the bowl's rim. Once users have finished on the toilet, they move to the bidet and, facing the wall, straddle the bowl. This traditional type is a completely separate bowl that looks a bit like a low sink, has one or two taps attached, and is commonly installed beside the toilet. A standalone bidet (right) next to a standard toilet.
0 kommentar(er)
